Ich habe mir SSM von der seite buttkickers runtergeladen und dank der readme anleitung größtenteils hinbekommen.
hier die Anleitung:
-- Installation --
Installation of SSM Aegis 1.2.3 is very different from previous SSM versions.
Please read and follow these directions very carefully. Failure to do so will
result in an improper installation.
Step 1) Unpack AEGIS FILES.zip in your Server's Root Directory (Where
server.cfg is loaded, and where server.log appears.
Step 2) Change, or submit a ticket to change your startup command line to
include "-mod AEGIS" at the end. (without the quotes) See Step 2 Ext. for more
help.
Step 3) Place astrada.cfg in your Server's Root Directory
Step 4) Edit astrada.cfg The standard astrada.cfg shows how a typical
gameservers.com server is setup. Change it as needed to point to the folders you
created.
Step 5) Place Xastrada.lua in the config_alpha folder you created.
Step 6) Modify Xastrada.lua for your server. MAKE SURE TO FIND AND CHANGE
ANYTHING MARKED "CHANGEME!"
Step 7) If your server modifys speed values, make sure to calibrate the
antispeed hack thresholds in your Xastrada.lua see the file for more info.
Step 8) Start the server.
On a successful startup, the server.log should have the following lines in it,
of course, the directorys will be specific for your setup:
[AEGIS] Crysis Wars SSM Aegis 1.2.3 PUBLIC 05/15/2009 loaded
[AEGIS] server's flag directory now: c:\games\XXX_XXX_XXX_XX\999999\warhead\Configs\fla gs\
[AEGIS] SSM's log directory now: c:\games\XXX_XXX_XXX_XX\999999\Configs\ssm_logs\
[AEGIS] server's config directory now: c:\games\XXX_XXX_XXX_XX\999999\warhead\Configs\con fig_alpha\
[AEGIS] server's root directory now: c:\games\XXX_XXX_XXX_XX\999999\warhead\Configs\
[AEGIS:LOG] opened c:\games\XXX_XXX_XXX_XX\999999\warhead\Configs\ser ver.log for reading and monitoring
[AEGIS] loading file c:\games\XXX_XXX_XXX_XX\999999\warhead\Configs\con fig_alpha\Xastrada.lua
[AEGIS] configuration loaded successfully.
This indicates SSM Aegis is loaded successfully and completely. If these lines
are not all in your log, and there are error messages in the logs, please feel
free to ask for help at http://forums.rodsmods.org
Step 2 Ext) You need to make sure "-mod AEGIS" is in your server's startup
command-line. On Gameservers.com, Art of War, and several other hosts, you must
request a change in the command line through a support ticket. Please see your
individual host's options for this. In general I suggest phrasing your support
ticket like this:
[supportTicket]Hello sir/madam,
I am attempted to install the SSM Aegis version 1.2.2 mod (found at
www.rodsmods.org) into my server. However, it requires a command-line change.
Please add the following to the end of my startup command-line.
-mod AEGIS[/supportTicket]
This allows them to know where to find the mod if they have trouble, and exactly
what they need to do for successful command line change.
To make sure the DLL loaded correctly, look for the following line in your server.log
[AEGIS] Loaded AEGIS.dll successfully.
1) Bei Schritt2, kann mir das mal einer auf deutsch erklären was der schritt bringt , wo ich die angegeben dateien finde und was ich verändern soll?
2)Wenn ich meinen Dedicated server nach schritt 8 starte und dann joine, passiert gar nichts. Auch steht in der server.log nix von ssm. Muss ich noch was anderes machen?
Vielleicht liegt es auch an der ordnerstruktur meiner server`s root directory:
Eigene Dateien/My Games/Crysis Wars/config :
Mods [enthält: Aegis (enthält: Bin 32, Bin 64, Game (ZZastrada.pak))]
server.cfg
astrada.cfg
config_alpha (enthält Xastrada.lua)
:grin:
