noxon
14.06.2006, 04:18
Kennt ihr eigentlich die BricoPacks (http://www.crystalxp.net/bricopack/en.htm)?
Ich habe mir gestern einmal das Crystal Clear Pack (http://www.crystalxp.net/bricopack/en-crystal-clear.htm) installiert und bin begeistert.
Bisherige Tools, die die Oberfläche von Windows geändert haben funktionierten irgendwie alle nicht richtig und verlangten eine Menge Resourcen und Performance. Nicht so bei den Bricopacks, denn die patchen und ersetzen jede Menge Windows-Dateien und ändern somit das Aussehen, ohne das es zu Leistungseinbußen kommt. Man hat immer noch die normale Luna-Oberfläche, nur das sie nun besser aussieht.
Sehr nützlich ist auch das RocketDock (http://www.crystalxp.net/galerie/en.id.159.htm). Ich glaube das läuft sogar ohne die Windows-Konvertierung.
Also. Wer's ausprobieren möchte kann das ja mal tun. Es hört sich zwar etwas gefährlich an, aber bisher habe ich noch von keinem gehört, der damit große Probleme hatte. Man kann das auch jeder Zeit wieder rückgängig machen.
Es gibt aber folgendes zu beachten:
- First, make sure that the pack is compatible with your system (to check you system’s information, right click on “my computer”, then, click on “proprieties”).
Here is the list of compatible systems :
- Windows XP
- Windows XP SP1
- Windows XP SP2
- Windows Server 2003
- Windows XP Media Center (SP1, SP2 or without SP)
- Windows XP Tablet Edition
Be careful, this pack isn’t compatible with 64 bit versions (x64) of Windows XP
- You must uninstall other software like Bricopack, ShellPack or CustoPack before the installation of a new Bricopack.
- We don’t guarantee the compatibility of our Bricopack with modified (Gold, Light, LSD…) versions of Windows
- You must have “administrator” rights in Windows XP to install this pack safely.
- If for X reasons your machine not work with the first boot following the installation of the pack, you can restore your system: Put your CD of XP in the reader and launch the restore console. Type "R" at the invites setup. You have the console with prompt "the c:\WINDOWS >", type: "BATCH BricoPackUninst.txt". Type EXIT when the operation finished.
Ich habe mir gestern einmal das Crystal Clear Pack (http://www.crystalxp.net/bricopack/en-crystal-clear.htm) installiert und bin begeistert.
Bisherige Tools, die die Oberfläche von Windows geändert haben funktionierten irgendwie alle nicht richtig und verlangten eine Menge Resourcen und Performance. Nicht so bei den Bricopacks, denn die patchen und ersetzen jede Menge Windows-Dateien und ändern somit das Aussehen, ohne das es zu Leistungseinbußen kommt. Man hat immer noch die normale Luna-Oberfläche, nur das sie nun besser aussieht.
Sehr nützlich ist auch das RocketDock (http://www.crystalxp.net/galerie/en.id.159.htm). Ich glaube das läuft sogar ohne die Windows-Konvertierung.
Also. Wer's ausprobieren möchte kann das ja mal tun. Es hört sich zwar etwas gefährlich an, aber bisher habe ich noch von keinem gehört, der damit große Probleme hatte. Man kann das auch jeder Zeit wieder rückgängig machen.
Es gibt aber folgendes zu beachten:
- First, make sure that the pack is compatible with your system (to check you system’s information, right click on “my computer”, then, click on “proprieties”).
Here is the list of compatible systems :
- Windows XP
- Windows XP SP1
- Windows XP SP2
- Windows Server 2003
- Windows XP Media Center (SP1, SP2 or without SP)
- Windows XP Tablet Edition
Be careful, this pack isn’t compatible with 64 bit versions (x64) of Windows XP
- You must uninstall other software like Bricopack, ShellPack or CustoPack before the installation of a new Bricopack.
- We don’t guarantee the compatibility of our Bricopack with modified (Gold, Light, LSD…) versions of Windows
- You must have “administrator” rights in Windows XP to install this pack safely.
- If for X reasons your machine not work with the first boot following the installation of the pack, you can restore your system: Put your CD of XP in the reader and launch the restore console. Type "R" at the invites setup. You have the console with prompt "the c:\WINDOWS >", type: "BATCH BricoPackUninst.txt". Type EXIT when the operation finished.