Programm für deine eigene Bootsequenz

[bumpelwumpel]

http://www.abload.de/image.php?img=imgv1w8.jpgHi Leute,

ich hab mich mal wieder mit Delphi beschäftigt und dachte mir, lass uns doch mal ein Programm schreiben.


Und das ist daraus geworden: Lass deine Eigene Bootsequenz ablaufen...

Mein Programm läßt eine vorgefertigte Textdatei als Bootsequenz.
Hier ein Video für die, die sich das nicht vorstellen können: *NEUES VIDEO* http://www.youtube.com/watch?v=uZNrTATsfC8


Was sollte noch in das Programm? Ihr könnt ja mal ein Paar Vorschläge machen.



Weitere Infos werden folgen.
http://www.abload.de/image.php?img=imgv1w8.jpg

[LKrieger]

Joa kommt eewig geil! CRYTEK hatte auch ne spezielle Anmeldung bei der GamesConvention letztes Jahr - wollten das aber nicht rausrücken:roll: :D:D.

Macht schon was her ja :D.

Mfg LKrieger

[Sturmhase]

Echt nice, meld mich hier auch mal das ich sowas *ham will* ^^

[Link93]

Ich hoffe der artet nicht aus wie der "Ich suche ein Kleidungstück" Thread :-D

Ich willst auch für Vista :)

@bumpelwumpel guck doch mal hier:
http://www.wincustomize.com/

[bumpelwumpel]

Also, falls das irgendwie falsch verstanden wurde, ich habe ein Programm geschrieben, oder bin besser gesagt gerade dabei, das eine Bootsequenz ablaufen lassen soll.

Dazu brauche ich aber noch ein gutes Beispiel. Und deshalb suche ich eine Bootsequenz in Text Form, so dass ich sie mit meine Programm ablaufen lassen kann.

[LKrieger]

Ne kein so richtigen Plan :oops::-D.

Aber du kannst ja dein Programm hier gerne mal vorstellen, vielleicht kann man dann mehr draus machen...

Mfg LKrieger

[noxon]

Wie wär's mit nem typischen Linux Bootlog?

Kernel-Log:

Inspecting /boot/System.map-2.6.22.5-31-default
Loaded 26158 symbols from /boot/System.map-2.6.22.5-31-default.
Symbols match kernel version 2.6.22.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.22.5-31-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 0000000000097800 (usable)
<4> BIOS-e820: 0000000000097800 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000007c515000 (usable)
<4> BIOS-e820: 000000007c515000 - 000000007c57e000 (ACPI NVS)
<4> BIOS-e820: 000000007c57e000 - 000000007d18d000 (usable)
<4> BIOS-e820: 000000007d18d000 - 000000007d18f000 (reserved)
<4> BIOS-e820: 000000007d18f000 - 000000007d275000 (usable)
<4> BIOS-e820: 000000007d275000 - 000000007d2cd000 (ACPI NVS)
<4> BIOS-e820: 000000007d2cd000 - 000000007d2dd000 (usable)
<4> BIOS-e820: 000000007d2dd000 - 000000007d2e4000 (ACPI NVS)
<4> BIOS-e820: 000000007d2e4000 - 000000007d2e8000 (usable)
<4> BIOS-e820: 000000007d2e8000 - 000000007d2f2000 (ACPI data)
<4> BIOS-e820: 000000007d2f2000 - 000000007d2f3000 (usable)
<4> BIOS-e820: 000000007d2f3000 - 000000007d2ff000 (ACPI data)
<4> BIOS-e820: 000000007d2ff000 - 000000007d300000 (usable)
<4> BIOS-e820: 000000007d300000 - 000000007e000000 (reserved)
<4> BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved)
<4> BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
<5>1107MB HIGHMEM available.
<5>896MB LOWMEM available.
<6>found SMP MP-table at 000fe5d0
<7>Entering add_active_range(0, 0, 512768) 0 entries of 256 used
<4>Zone PFN ranges:
<4> DMA 0 -> 4096
<4> Normal 4096 -> 229376
<4> HighMem 229376 -> 512768
<4>early_node_map[1] active PFN ranges
<4> 0: 0 -> 512768
<7>On node 0 totalpages: 512768
<7> DMA zone: 32 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 4064 pages, LIFO batch:0
<7> Normal zone: 1760 pages used for memmap
<7> Normal zone: 223520 pages, LIFO batch:31
<7> HighMem zone: 2214 pages used for memmap
<7> HighMem zone: 281178 pages, LIFO batch:31
<6>DMI 2.4 present.
<6>Using APIC driver default
<6>Intel MultiProcessor Specification v1.4
<6> Virtual Wire compatibility mode.
<6>OEM ID: Product ID: APIC at: 0xFEE00000
<4>Processor #0 6:7 APIC version 20
<4>Enabling APIC mode: Flat. Using 0 I/O APICs
<3>BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)
<6>Processors: 1
<4>Allocating PCI resources starting at 80000000 (gap: 7e000000:72000000)
<4>Built 1 zonelists. Total pages: 508762
<5>Kernel command line: root=/dev/sda1 vga=0x31a acpi=off resume=/dev/sda2 splash=silent
<6>bootsplash: silent mode.
<7>mapped APIC to ffffd000 (fee00000)
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 16384 bytes)
<4>Detected 2826.395 MHz processor.
<4>Console: colour dummy device 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 2024484k/2051072k available (1825k kernel code, 24408k reserved, 764k data, 228k init, 1132672k highmem)
<4>virtual kernel memory layout:
<4> fixmap : 0xffdf4000 - 0xfffff000 (2092 kB)
<4> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
<4> vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
<4> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
<4> .init : 0xc038e000 - 0xc03c7000 ( 228 kB)
<4> .data : 0xc02c86ed - 0xc0387964 ( 764 kB)
<4> .text : 0xc0100000 - 0xc02c86ed (1825 kB)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 5656.45 BogoMIPS (lpj=11312912)
<6>Security Framework v1.0.0 initialized
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0008e3fd 00000000 00000001
<4>monitor/mwait feature present.
<4>using mwait in idle threads.
<6>CPU: L1 I cache: 32K, L1 D cache: 32K
<6>CPU: L2 cache: 6144K
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 0
<7>CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0008e3fd 00000000 00000001
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<4>Compat vDSO mapped to ffffe000.
<6>Checking 'hlt' instruction... OK.
<6>SMP alternatives: switching to UP code
<6>Freeing SMP alternatives: 12k freed
<6>Unpacking initramfs... done
<6>Freeing initrd memory: 4153k freed
<4>CPU0: Intel(R) Core(TM)2 Duo CPU E8300 @ 2.83GHz stepping 06
<6>Total of 1 processors activated (5656.45 BogoMIPS).
<6>Brought up 1 CPUs
<6>Booting paravirtualized kernel on bare hardware
<6>NET: Registered protocol family 16
<6>PCI: Using configuration type 1
<4>Setting up standard PCI resources
<6>ACPI: Interpreter disabled.
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI: disabled
<6>PnPBIOS: Scanning system for PnP BIOS support...
<6>PnPBIOS: Found PnP BIOS installation structure at 0xc00fe0e0
<6>PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xaf51, dseg 0x400
<6>PnPBIOS: 2 nodes reported by PnP BIOS; 2 recorded by driver
<4>PCI: Probing PCI hardware
<7>PCI: Probing PCI hardware (bus 00)
<6>PCI: Transparent bridge - 0000:00:1e.0
<6>PCI: Using IRQ router PIIX/ICH [8086/2914] at 0000:00:1f.0
<7>PCI: setting IRQ 9 as level-triggered
<6>PCI: Found IRQ 9 for device 0000:00:1c.0
<6>PCI: Sharing IRQ 9 with 0000:00:1a.2
<6>PCI: Sharing IRQ 9 with 0000:00:1a.7
<6>PCI: Sharing IRQ 9 with 0000:00:1c.4
<6>PCI: Found IRQ 9 for device 0000:00:1c.1
<6>PCI: Sharing IRQ 9 with 0000:00:19.0
<7>PCI: setting IRQ 10 as level-triggered
<6>PCI: Found IRQ 10 for device 0000:00:1c.2
<6>PCI: Sharing IRQ 10 with 0000:00:1a.0
<6>PCI: Sharing IRQ 10 with 0000:00:1d.2
<6>PCI: Sharing IRQ 10 with 0000:00:1f.3
<7>PCI: setting IRQ 11 as level-triggered
<6>PCI: Found IRQ 11 for device 0000:00:1c.3
<6>PCI: Sharing IRQ 11 with 0000:00:1d.1
<6>PCI: Sharing IRQ 11 with 0000:06:03.0
<6>PCI: Bridge: 0000:00:1c.0
<6> IO window: 2000-2fff
<6> MEM window: 90100000-901fffff
<6> PREFETCH window: 90500000-905fffff
<6>PCI: Bridge: 0000:00:1c.1
<6> IO window: disabled.
<6> MEM window: disabled.
<6> PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:1c.2
<6> IO window: disabled.
<6> MEM window: disabled.
<6> PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:1c.3
<6> IO window: disabled.
<6> MEM window: disabled.
<6> PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:1c.4
<6> IO window: disabled.
<6> MEM window: disabled.
<6> PREFETCH window: disabled.
<6>PCI: Bridge: 0000:00:1e.0
<6> IO window: 1000-1fff
<6> MEM window: 90000000-900fffff
<6> PREFETCH window: 90600000-906fffff
<6>PCI: Found IRQ 9 for device 0000:00:1c.0
<6>PCI: Sharing IRQ 9 with 0000:00:1a.2
<6>PCI: Sharing IRQ 9 with 0000:00:1a.7
<6>PCI: Sharing IRQ 9 with 0000:00:1c.4
<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<6>PCI: Found IRQ 9 for device 0000:00:1c.1
<6>PCI: Sharing IRQ 9 with 0000:00:19.0
<7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
<6>PCI: Found IRQ 10 for device 0000:00:1c.2
<6>PCI: Sharing IRQ 10 with 0000:00:1a.0
<6>PCI: Sharing IRQ 10 with 0000:00:1d.2
<6>PCI: Sharing IRQ 10 with 0000:00:1f.3
<7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
<6>PCI: Found IRQ 11 for device 0000:00:1c.3
<6>PCI: Sharing IRQ 11 with 0000:00:1d.1
<6>PCI: Sharing IRQ 11 with 0000:06:03.0
<7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
<6>PCI: Found IRQ 9 for device 0000:00:1c.4
<6>PCI: Sharing IRQ 9 with 0000:00:1a.2
<6>PCI: Sharing IRQ 9 with 0000:00:1a.7
<6>PCI: Sharing IRQ 9 with 0000:00:1c.0
<7>PCI: Setting latency timer of device 0000:00:1c.4 to 64
<7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
<6>NET: Registered protocol family 2
<6>Time: tsc clocksource has been installed.
<4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
<4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>Machine check exception polling timer started.
<6>audit: initializing netlink socket (disabled)
<5>audit(1219038495.320:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>Boot video device is 0000:00:02.0
<7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.0:pcie00]
<7>Allocate Port Service[0000:00:1c.0:pcie02]
<7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.1:pcie00]
<7>Allocate Port Service[0000:00:1c.1:pcie02]
<7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.2:pcie00]
<7>Allocate Port Service[0000:00:1c.2:pcie02]
<7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.3:pcie00]
<7>Allocate Port Service[0000:00:1c.3:pcie02]
<7>PCI: Setting latency timer of device 0000:00:1c.4 to 64
<4>assign_interrupt_mode Found MSI capability
<7>Allocate Port Service[0000:00:1c.4:pcie00]
<7>Allocate Port Service[0000:00:1c.4:pcie02]
<6>vesafb: framebuffer at 0x80000000, mapped to 0xf8880000, using 8128k, total 8128k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=2
<6>vesafb: protected mode interface info at 00ff:44f0
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...
<6>bootsplash: silentjpeg size 98233 bytes
<6>bootsplash: ...found (1280x1024, 35219 bytes, v3).
<4>Console: switching to colour frame buffer device 156x60
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12ac
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a National Semiconductor PC87306
<6>PNP: No PS/2 controller found. Probing ports directly.
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>mice: PS/2 mouse device common for all mice
<6>input: AT Translated Set 2 keyboard as /class/input/input0
<6>input: PC Speaker as /class/input/input1
<6>NET: Registered protocol family 1
<4>Using IPI No-Shortcut mode
<6>Freeing unused kernel memory: 228k freed
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<7>ata_piix 0000:00:1f.2: version 2.11
<6>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
<6>PCI: Found IRQ 11 for device 0000:00:1f.2
<6>PCI: Sharing IRQ 11 with 0000:00:1a.1
<6>PCI: Sharing IRQ 11 with 0000:00:1f.5
<7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
<6>scsi0 : ata_piix
<6>scsi1 : ata_piix
<6>ata1: SATA max UDMA/133 cmd 0x00013458 ctl 0x00013476 bmdma 0x00013430 irq 11
<6>ata2: SATA max UDMA/133 cmd 0x00013450 ctl 0x00013472 bmdma 0x00013438 irq 11
<6>ata1.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100
<6>ata1.00: configured for UDMA/100
<6>ata1: EH pending after completion, repeating EH (cnt=4)
<5>scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203D SB00 PQ: 0 ANSI: 5
<6>ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
<6>PCI: Found IRQ 11 for device 0000:00:1f.5
<6>PCI: Sharing IRQ 11 with 0000:00:1a.1
<6>PCI: Sharing IRQ 11 with 0000:00:1f.2
<7>PCI: Setting latency timer of device 0000:00:1f.5 to 64
<6>scsi2 : ata_piix
<6>scsi3 : ata_piix
<6>ata3: SATA max UDMA/133 cmd 0x00013448 ctl 0x0001346e bmdma 0x00013410 irq 11
<6>ata4: SATA max UDMA/133 cmd 0x00013440 ctl 0x0001346a bmdma 0x00013418 irq 11
<4>rr2310_00: no version for "struct_module" found: kernel tainted.
<4>rr2310_00: module license 'Proprietary' taints kernel.
<4>rr2310_00:RocketRAID 231x/230x controller driver v2.2.08.0314 (Mar 21 2008 10:20:04)
<6>PCI: Found IRQ 11 for device 0000:01:00.0
<6>PCI: Sharing IRQ 11 with 0000:00:02.0
<6>PCI: Sharing IRQ 11 with 0000:00:03.0
<7>PCI: Setting latency timer of device 0000:01:00.0 to 64
<4>rr2310_00:adapter at PCI 1:0:0, IRQ 11
<4>rr2310_00:start channel [0,0]
<4>rr2310_00:start channel [0,1]
<4>rr2310_00:start channel [0,2]
<4>rr2310_00:start channel [0,3]
<4>rr2310_00:[0 0] Start channel soft reset.
<4>rr2310_00:[0 1] Start channel soft reset.
<4>rr2310_00:[0 2] Start channel soft reset.
<4>rr2310_00:[0 3] Start channel soft reset.
<4>rr2310_00:channel [0,0] started successfully
<4>rr2310_00:channel [0,1] started successfully
<4>rr2310_00:channel [0,2] started successfully
<4>rr2310_00:channel [0,3] started successfully
<6>scsi4 : rr2310_00
<5>scsi 4:0:0:0: Direct-Access HPT DISK_4_0 4.00 PQ: 0 ANSI: 0
<4>thermal: Unknown symbol acpi_processor_set_thermal_limit
<6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>USB Universal Host Controller Interface driver v3.0
<6>PCI: Found IRQ 10 for device 0000:00:1a.0
<6>PCI: Sharing IRQ 10 with 0000:00:1d.2
<6>PCI: Sharing IRQ 10 with 0000:00:1f.3
<7>PCI: Setting latency timer of device 0000:00:1a.0 to 64
<6>uhci_hcd 0000:00:1a.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:1a.0: irq 10, io base 0x000030c0
<6>usb usb1: new device found, idVendor=0000, idProduct=0000
<6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: UHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
<6>usb usb1: SerialNumber: 0000:00:1a.0
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<5>sd 4:0:0:0: [sda] 1953234944 512-byte hardware sectors (1000056 MB)
<5>sd 4:0:0:0: [sda] Write Protect is off
<7>sd 4:0:0:0: [sda] Mode Sense: 2f 00 00 00
<5>sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 4:0:0:0: [sda] 1953234944 512-byte hardware sectors (1000056 MB)
<5>sd 4:0:0:0: [sda] Write Protect is off
<7>sd 4:0:0:0: [sda] Mode Sense: 2f 00 00 00
<5>sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1 sda2 sda3 sda4
<5>sd 4:0:0:0: [sda] Attached SCSI disk
<6>PCI: Found IRQ 11 for device 0000:00:1a.1
<6>PCI: Sharing IRQ 11 with 0000:00:1f.2
<6>PCI: Sharing IRQ 11 with 0000:00:1f.5
<7>PCI: Setting latency timer of device 0000:00:1a.1 to 64
<6>uhci_hcd 0000:00:1a.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:1a.1: irq 11, io base 0x000030a0
<6>usb usb2: new device found, idVendor=0000, idProduct=0000
<6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: UHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
<6>usb usb2: SerialNumber: 0000:00:1a.1
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<4>Clocksource tsc unstable (delta = 464023057 ns)
<6>Time: pit clocksource has been installed.
<6>PCI: Found IRQ 9 for device 0000:00:1a.7
<6>PCI: Sharing IRQ 9 with 0000:00:1a.2
<7>PCI: Setting latency timer of device 0000:00:1a.7 to 64
<6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
<6>ehci_hcd 0000:00:1a.7: debug port 1
<7>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
<6>ehci_hcd 0000:00:1a.7: irq 9, io mem 0x90421400
<6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb3: new device found, idVendor=0000, idProduct=0000
<6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: EHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.22.5-31-default ehci_hcd
<6>usb usb3: SerialNumber: 0000:00:1a.7
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 6 ports detected
<6>PCI: Found IRQ 10 for device 0000:00:1d.7
<6>PCI: Sharing IRQ 10 with 0000:00:1d.0
<7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
<6>ehci_hcd 0000:00:1d.7: debug port 1
<7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
<6>ehci_hcd 0000:00:1d.7: irq 10, io mem 0x90421000
<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb4: new device found, idVendor=0000, idProduct=0000
<6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: EHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.22.5-31-default ehci_hcd
<6>usb usb4: SerialNumber: 0000:00:1d.7
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 6 ports detected
<6>PCI: Found IRQ 9 for device 0000:00:1a.2
<6>PCI: Sharing IRQ 9 with 0000:00:1a.7
<7>PCI: Setting latency timer of device 0000:00:1a.2 to 64
<6>uhci_hcd 0000:00:1a.2: UHCI Host Controller
<6>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
<6>uhci_hcd 0000:00:1a.2: irq 9, io base 0x00003080
<6>usb usb5: new device found, idVendor=0000, idProduct=0000
<6>usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb5: Product: UHCI Host Controller
<6>usb usb5: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
<6>usb usb5: SerialNumber: 0000:00:1a.2
<6>usb usb5: configuration #1 chosen from 1 choice
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 2 ports detected
<6>PCI: Found IRQ 10 for device 0000:00:1d.0
<6>PCI: Sharing IRQ 10 with 0000:00:1d.7
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
<6>uhci_hcd 0000:00:1d.0: irq 10, io base 0x00003060
<6>usb usb6: new device found, idVendor=0000, idProduct=0000
<6>usb usb6: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb6: Product: UHCI Host Controller
<6>usb usb6: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
<6>usb usb6: SerialNumber: 0000:00:1d.0
<6>usb usb6: configuration #1 chosen from 1 choice
<6>hub 6-0:1.0: USB hub found
<6>hub 6-0:1.0: 2 ports detected
<6>PCI: Found IRQ 11 for device 0000:00:1d.1
<6>PCI: Sharing IRQ 11 with 0000:06:03.0
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
<6>uhci_hcd 0000:00:1d.1: irq 11, io base 0x00003040
<6>usb usb7: new device found, idVendor=0000, idProduct=0000
<6>usb usb7: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb7: Product: UHCI Host Controller
<6>usb usb7: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
<6>usb usb7: SerialNumber: 0000:00:1d.1
<6>usb usb7: configuration #1 chosen from 1 choice
<6>hub 7-0:1.0: USB hub found
<6>hub 7-0:1.0: 2 ports detected
<6>PCI: Found IRQ 10 for device 0000:00:1d.2
<6>PCI: Sharing IRQ 10 with 0000:00:1a.0
<6>PCI: Sharing IRQ 10 with 0000:00:1f.3
<7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
<6>uhci_hcd 0000:00:1d.2: irq 10, io base 0x00003020
<6>usb usb8: new device found, idVendor=0000, idProduct=0000
<6>usb usb8: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb8: Product: UHCI Host Controller
<6>usb usb8: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
<6>usb usb8: SerialNumber: 0000:00:1d.2
<6>usb usb8: configuration #1 chosen from 1 choice
<6>hub 8-0:1.0: USB hub found
<6>hub 8-0:1.0: 2 ports detected
<4>swsusp: Basic memory bitmaps created
<4>swsusp: Basic memory bitmaps freed
<4>Attempting manual resume
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda1, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<5>scsi 0:0:0:0: Attached scsi generic sg0 type 5
<5>sd 4:0:0:0: Attached scsi generic sg1 type 0
<6>Linux agpgart interface v0.102 (c) Dave Jones
<6>PCI: Found IRQ 10 for device 0000:00:1f.3
<6>PCI: Sharing IRQ 10 with 0000:00:1a.0
<6>PCI: Sharing IRQ 10 with 0000:00:1d.2
<6>agpgart: Detected an Intel Q35 Chipset.
<6>agpgart: Detected 7164K stolen memory.
<6>agpgart: AGP aperture is 256M @ 0x80000000
<4>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 0:0:0:0: Attached scsi CD-ROM sr0
<6>Intel(R) PRO/1000 Network Driver - version 7.6.5-NAPI
<6>Copyright (c) 1999-2007 Intel Corporation.
<6>PCI: Found IRQ 9 for device 0000:00:19.0
<7>PCI: Setting latency timer of device 0000:00:19.0 to 64
<6>e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1c:c0:34:32:82
<6>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
<6>PCI: Found IRQ 11 for device 0000:06:02.0
<6>skge 1.11 addr 0x90000000 irq 11 chip Yukon-Lite rev 9
<6>skge eth1: addr 00:1c:f0:11:f7:9e
<6>PCI: Found IRQ 11 for device 0000:06:03.0
<6>Intel(R) PRO/1000 Network Driver - 0.2.0
<6>Copyright (c) 1999-2007 Intel Corporation.
<6>PCI: Sharing IRQ 11 with 0000:00:1d.1
<6>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[90004000-900047ff] Max Packet=[2048] IR/IT contexts=[8/8]
<6>Adding 1052248k swap on /dev/sda2. Priority:-1 extents:1 across:1052248k
<6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
<6>loop: module loaded
<6>AppArmor: AppArmor initialized
<5>audit(1219038503.820:2): type=1505 info="AppArmor initialized" pid=1527
<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090270001f93f0e]
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Bootlog:

Boot logging started on /dev/tty1(/dev/console) at Mon Aug 18 05:48:16 2008

Creating device nodes with udev
Trying manual resume from /dev/sda2
Invoking userspace resume from /dev/sda2
resume: Could not stat configuration file
resume: libgcrypt version: 1.2.4
Trying manual resume from /dev/sda2
Invoking in-kernel resume from /dev/sda2
Waiting for device /dev/sda1 to appear: ok
fsck 1.40.2 (12-Jul-2007)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda1
/dev/sda1: clean, 264811/2626560 files, 1408580/5242880 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/sda1

Boot logging started on /dev/tty1(/dev/console (deleted)) at Mon Aug 18 07:48:22 2008

Starting udevd : done
Loading required kernel modules : done
Activating swap-devices in /etc/fstab... : done
mount: according to mtab, /dev/sda1 is already mounted on /

Activating device mapper... : done
Starting MD Raid : unused
Checking file systems...
fsck 1.40.2 (12-Jul-2007) : done

Mounting local file systems...
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
nothing was mounted : done
Mounting securityfs on /sys/kernel/security : done
Loading AppArmor module : done
Loading AppArmor profiles : done
Setting up the hardware clock : done
Creating /var/log/boot.msg : done
Activating remaining swap-devices in /etc/fstab... : done
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
Configured serial ports : done
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536 : done
Enabling syn flood protection : done
Disabling IP forwarding: done
Setting up hostname 'alpha' : done
Setting up loopback interface lo
lo IP address: 127.0.0.1/8
Checking for network time protocol daemon (NTPD): unused
Can't determine current runlevel : done
System Boot Control: The system has been set up
Skipped features: boot.md boot.cycle
System Boot Control: Running /etc/init.d/boot.local : done

Boot logging started on /dev/tty1(/dev/console) at Mon Aug 18 07:48:29 2008

Master Resource Control: previous runlevel: N, switching to runlevel: 3

INIT: Entering runlevel: 3


acpid: no ACPI support in kernel : skipped
Initializing random number generator : done
Starting resource manager : done
RTNETLINK answers: No such process
startproc: execve (/sbin/resmgrd) [ /sbin/resmgrdStarting D-Bus daemonChecking/updating CPU microcode : done
Starting ConsoleKit : done
Starting HAL daemon : done
Loading CPUFreq modules (CPUFreq not supported)
Setting up network interfaces:
lo
lo IP address: 127.0.0.1/8
Checking for network time protocol daemon (NTPD) : unused
eth0 device: Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02)
eth0 (DHCP) . . . . . no IP address yet... backgrounding.
waiting
eth1 device: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11)
eth1 IP address: 10.0.0.1/8
Checking for network time protocol daemon (NTPD): unused
Waiting for mandatory devices: eth0 __NSC__ : 13 12 11 10 9 8 6 5 4 3 2 1 0
eth0 device: Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02)
eth0 dhcpcd is still waiting for data
waiting
eth0 interface could not be set up until now : failed
Setting up service network . . . . . . . . . . . . . . . . failed
Starting syslog services : done
No /etc/samba/smbfstab found and no type cifs active in /etc/fstab. : skipped
Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz : done
Loading compose table latin1.add : done
Start Unicode mode : done
Loading console font lat9w-16.psfu -m trivial G0:loadable : done
Starting auditd : done
Starting gdomap : done
Starting irqbalance : unused
Starting Name Service Cache Daemon : done
Starting RPC portmap daemon : done
Starting cupsd : done
Starting hptsvr daemon : done
Starting powersaved : done
Starting SSH daemon : done
Starting mail service (Postfix) : failed
Starting CRON daemon : done
Starting smartd : done
Starting Avahi daemon.......... done
Starting Avahi DNS Configuration daemonstartproc: exit status of parent of /usr/sbin/avahi-dnsconfd: 1 : failed
Starting DRBD resources: [ d(r0) s(r0) n(r0) ].
************************************************** *************
DRBD's startup script waits for the peer node(s) to appear.
- In case this node was already a degraded cluster before the
reboot the timeout is 120 seconds. [degr-wfc-timeout]
- If the peer was available before the reboot the timeout will
expire after 0 seconds. [wfc-timeout]
(These values are for resource 'r0'; 0 sec -> wait forever)
To abort waiting enter 'yes'
Timeout reached while wating for return value
Could not receive return value from daemon process.
Starting High-Availability services: 2008/08/18_07:49:20
heartbeat[3836]: 2008/08/18_07:49:21 WARN: Logging daemon is disabled --enabling logging daemon is recommended

Master Resource Control: runlevel 3 has been reached
Failed services in runlevel 3: network postfix avahi-dnsconfd
Skipped services in runlevel 3: acpid smbfs irq_balancer



Wenn du willst kannst du dir ja ein paar gut "klingende" Zeilen aussuchen. Ich würde das Bootlog empfehlen. Da geht's um Software, während es im Kernellog mehr um die Hardware geht.
Dieses ": done" erscheint beim booten übrigens immer zeitlich versetzt am Ende der Zeile, wenn der entsprechnde Dienst gestartet wurde.

[noxon]

Wenn du willst kannst du auch noch ein entsprechendes Shutdown-Log haben:


Boot logging started on /dev/tty1(/dev/console) at Mon Aug 18 07:50:34 2008

Master Resource Control: previous runlevel: 3, switching to runlevel: 0

Shutting down cupsd : done
Stopping High-Availability services : done
logd[4055]: 2008/08/18_07:50:34 debug: Stopping ha_logd with pid 3766
logd[4055]: 2008/08/18_07:50:34 info: Waiting for pid=3766 to exit
<notice>killproc: kill(3666,15)
<notice>killproc: kill(3516,15)
Stopping hptsvr daemon : done
<notice>killproc: kill(3586,15)
Shutting down CRON daemon : done
Shutting down smartd : done
<notice>killproc: kill(3481,15)
Shutting down Name Service Cache Daemon : done
<notice>killproc: kill(3525,15)
Shutting down auditd : done
Stopping gdomap : done
Shutting down irqbalance : done
Shutting down mail service (Postfix) : done
<notice>killproc: kill(3535,15)
Shutting down Avahi DNS Configuration daemonFailed to kill daemon : done
Shutting down Avahi daemon : done
Saving random seed : done
RTNETLINK answers: No such process
Shutting down RPC portmap daemon : done
logd[4055]: 2008/08/18_07:50:35 info: Pid 3766 exited
Stopping all DRBD resources.
<notice>killproc: kill(3682,15)
Shutting down SSH daemon : done
Shutting down powersaved : done
Umount SMB/ CIFS File Systems : done
<notice>killproc: kill(3219,15)
Shutting down syslog services : done
<notice>killproc: kill(3216,15)
Shutting down network interfaces:
eth0 device: Intel Corporation 82566DM-2 Gigabit Network Connection (rev 02) : done
eth1 device: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11) : done
Shutting down service network . . . . . . . . . . . . . . . : done
<notice>killproc: kill(1896,15)
Shutting down HAL daemon : done
<notice>killproc: kill(1859,15)
<notice>killproc: kill(1898,15)
Shutting down acpid : done
Shutting down ConsoleKit : done
Shutting down resource manager : done
<notice>killproc: kill(1868,15)
Shutting down D-Bus daemon : done
Running /etc/init.d/halt.local : done
<notice>killproc: kill(4027,3)
Sending all processes the TERM signal... : done

[bumpelwumpel]

Hi Leute,

ich hab mich mal wieder mit Delphi beschäftigt und dachte mir, lass uns doch mal ein Programm schreiben.


Und das ist daraus geworden:

Ein Programm das eine vorgefertigte Textdatei als Bootsequenz ablaufen lassen kann.
Hier ein Video für die, die sich das nicht vorstellen können: http://www.youtube.com/watch?v=hsZVXRhx9kY
(könnte sein, dass das Video erst noch von Youtube kontrolliert werden muss)


Weitere Infos werden folgen.

[E1ite-Marc0]

Muss lustig sein. :) Mal schauen, wenn dein Ding fertig ist. :)
MfG
Marc0

[noxon]

Ich habe die beiden Threads mal wieder vereint. Das muss wirklich nicht sein, dass man für jeden Fortschritt einen neuen Thread öffnet.

[bumpelwumpel]

Kleines Update. Neues Video.

Was sollte so ein Bootseqenzprogramm noch können?

Link zum ersten Post:http://crysis.4thdimension.info/forum/showpost.php?p=304523&postcount=1